Duan Hongxuan put on his gloves and started to work by himself. Everyone in the project team was watching with great interest and thoughts. Everyone wanted to see if their talented Chief Engineer Duan was bragging or he really had a job.
Of course, no one among the hundred or so people present believed that their Chief Engineer Duan was really better than those eighth-level fitter masters. As long as Chief Engineer Duan's fitter work was just passable, with his level
His young age was enough to impress everyone, but no one expected him to be able to do something that even a master fitter couldn't do.
Several master fitters standing next to Duan Hongxuan, one meter away from him, were also looking at Duan Hongxuan's movements with smiles. To be honest, in the project team, these masters were dissatisfied with this young man from the bottom of their hearts.
Chief Engineer Duan was so impressed that he, who was not even older than their son, could lead a hundred or so people several times older than him in such an important project team of the Ministry of Machinery Industry.
It is enough to show that Mr. Duan is a man of real ability.
But now, haha, they just wait and see, just don’t make Mr. Duan embarrassed for a while. As for Mr. Duan’s fitter work, they really don’t have high hopes!
Duan Hongxuan put on his gloves, checked the blank parts fixed on the machine calmly, made slight adjustments, and nodded slightly with satisfaction.
"Yeah! Not bad, at least he's not a layman!" Several old fitters nearby looked at each other and nodded with satisfaction.
But what Duan Hongxuan did next made Xiaojia understand. Several old masters were startled and wanted to speak, but after thinking about it, they decided to give it up for now and wait to see what Chief Engineer Duan was going to do next.
If you are satisfied with the tools under the lathe and want to replace them with new ones, let’s take a look first!
I saw Master Liu unloading the tool fixed under the machine tool, holding it out of his hand and looking at it repeatedly, then holding the fixed part of the tool with his hand, he placed the cutting edge of the tool heavily on the place where the part needed to be processed.
In everyone's surprised and surprised eyes, the machine tool was turned on directly.
And waiting for everyone's reaction, as the part blank under the machine tool rotates at a low speed, a small amount of metal chips are cut by the tool outside Master Liu's hand. Several master fitters are jumping up and down watching in front of them. We did it.
In my life as a fitter, I have never seen anyone work like that. If you are careless, you will have an accident.
"Gong Duan, stop, stop quickly!" Old Duan Hongxuan in front of Master Liu shouted, hopping slowly.
Master Liu stopped the machine when he heard this, looked back at Old Liu and said, "Master Liu, what's wrong?"
"What's wrong?" Old Liu was about to go crazy. When he saw Master Liu stop the machine, he slowly stepped down and grabbed Kang Jierong's hand holding the knife, "General Manager Duan, if someone works like him, he will be the best."
He knows how to do benchwork! The tool in his hand must be fixed under the tool holder of the machine tool, so there is nothing left in his hand!
Can the hand hold it steadily? Can the machine tool rotate at such a low speed, can human hands bear it? An accident will occur if it is done like that!
Okay, you can see it. You know everything about the work of a fitter. You'd better not make trouble. You can think of a solution later!
Kang Jierong only cares about what other people think. She just keeps her head high and does my work. She keeps changing various tools and postures. The whole workshop is silent, and only the machine tool is rotating and the metal is left.
Low speed friction noise.
The behavior of the previous few masters was basically the same as that of Duan Hongxuan. They all looked at Master Liu as if they had seen a ghost.
Kang Jierong's unconventional operation, let alone several fitter masters, were all dumbfounded by the hundreds of expert engineers. Although we are engineers and fitters, even if we have not done it ourselves
He had been doing that kind of work, but after all, such a young man had never seen and heard how the master workers worked under the machine tools.
In our opinion, Master Liu's magical operation is not nonsense. As long as we see any worker in our unit who dares to work like that, we will definitely go down and kill him! But now, in addition to being dumbfounded by the scene, we are really shocked.
Damn it, did you see that there were not many master fitters nearby who were talking?
Kang Jierong smiled and said: "Masters, if there is no problem, let's discuss it later. Can you finish the work first?"
You just believe it, he is a primary school student and they are less energetic and mature than you who have been doing manual labor all year round.
You are the technical chief of the project team. If you get injured, it won't hurt. Our entire project team will be able to explain to the superiors, especially you fitters."
Next, Master Liu did another amazing operation that slightly violated the operating rules. I held the tool in my hand to cut the low-speed rotating steel parts. At the end, I even fixed the tool under the machine tool and removed the parts to be processed from under the machine tool.
After unloading it and holding it in his hands, the little steel thing that required two strong men to lift it turned out to be as heavy as a thing in Master Liu's hands. Master Liu just held the steel parts together like a straw and put them on the low-speed rotating knife.
Go down and cut.
Old Duan Hongxuan looked at Master Liu Feng Zhongyun's smiling face. He was not embarrassed at all. He was so old!
"Duan Hongxuan, if you would like to take a look at the point you just processed first!"
Old Duan Hongxuan secretly lowered his waist and sat on the horse, and his body was filled with energy. You still believed that you pushed him to move him, "Huh! Huh?" If he moved, he continued, "Huh?" It still moved.
"Ouch! That's not interesting!" Old Kang Jierong became interested, thinking about how the elegant-looking primary school student looked so weak but didn't have much strength.
Old Duan Hongxuan had no choice but to get close to it and was looked at by it. He stretched out his hand to touch it heavily, and his heart was suddenly shocked.
In particular, human hands are probably not as stable as machines anyway. It is absolutely a joke to hold a tool with your hands to cut metal parts that rotate at low speeds. It is also cutting wood or processing ceramic clay, then
However, with the low-strength metal and the stability of the human hand, if anyone dares to do that, there will be no accidents, so the cut arc surface will definitely have no fluctuations in the front and back.
This chapter is not finished yet, please click on the next page to continue reading the exciting content! You know how the fitter's work should be done, and he knows how to use the machine tool, but when you are working later, no matter how weird your behavior is, you
The operation is in compliance with the operating procedures. Masters, please don't interrupt you now. We will talk about it after you finish your work!"
But Duan Hongxuan felt it with his hand and found that the cut curved surface had no fluctuations at all. How could that be possible? It simply subverted common sense.
Duan Hongxuan was talking outside his mouth, pushing Master Liu aside with one hand, and using the other hand to pick up the knife outside my hand.
Kang Jierong didn't notice it, so she turned around and waved, asking for a testing tool and started to measure it casually. Duan Hongxuan's eyes were rounded with that measurement. He repeated the measurement several times with confidence, and the one who was bent forward was tall.
He kept his head in the measuring position and stared blankly at the broken part for a while. Then he raised his head and looked at Master Liu as if he had seen a ghost and asked: "He, how did he do it? How is that possible?"
Speaking of things under the machine tool, although the engineers and experts are good at it, when it comes to theory, they are not good at all.
Master Liu was very talkative and could not move while standing. Old Duan Hongxuan pushed twice and still had no push. He looked at Master Liu with a surprised look on his face. He reluctantly applied more force with his hand, but Master Liu was still unable to move.
move.
"Huh?" Duan Hongxuan looked at the rough parts under the machine tool doubtfully. When it was over, Tai was still there, but then his face moved and his eyes involuntarily focused. With my experience as a young man, old Duan Hongxuan could tell at a glance.
There is nothing right about the part that was cut by the tool just now.
"What's wrong, Old Liu?" Seeing Kang Jierong's behavior, several fitters nearby hurriedly gathered around and asked Duan Hongxuan curiously. Kang Jierong pointed to the parts under the machine tool: "They should take a look for themselves first!"
