Chapter 1210 The first self-developed CNC machine tool
Jiang Botao was very pleased to see these young people.
"You are all employees of Northern Mechanical Engineering Construction Group. This company is a company specially established in our country. It is responsible for the important task of revitalizing the country's manufacturing industry, and this important task rests on all of you sitting here.
I see that you are all young people in your thirties and forties. Youth is great! Your mind is flexible and your body is strong. If you don’t work hard at this time, when will you work hard?
Liu Lang is the best manufacturing expert in our country, and Norinco is also the best manufacturing company in our country. It is your honor for them to teach you personally, so you must study hard and master the knowledge as quickly as possible.
, and do you have the confidence to apply the knowledge in your work?”
Jiang Botao gave a passionate speech as soon as he arrived, igniting everyone's enthusiasm.
"Yes, we are confident!"
Everyone shouted in unison.
"Okay, just have confidence. I, Jiang Botao, have remembered everyone's shouting. When the Northern Mechanical Engineering Construction Group achieves results, the Ministry of Industry will discuss their merits and reward them. I hope that those sitting here can go to the Ministry of Industry, or even
Participate in the national commendation meeting, then you will be the heroes of the country and nation, and everyone will remember you!"
Jiang Botao's speech was very brief, less than ten minutes in total.
"Liu Lang, I won't bother you anymore. I'll come back tomorrow!"
After Jiang Botao finished speaking, he led everyone away.
Song Lifeng was not surprised. Others felt that the relationship between Minister Jiang and Liu Lang was really extraordinary. Jiang Botao was the head of the country, and the Ministry of Industry was a very important department in the country, second only to the State Planning and Economic Commission.
, the first thing a person like this did when he came to Fucheng was to go to the North Industrial Group to inspect, but he only talked for less than ten minutes and then left. It was not that he was dissatisfied with Liu Lang but that he didn't want to disturb the other party. He didn't even listen to this kind of thing.
Pass.
Needless to say, the leaders of Fucheng City reported their work to Jiang Botao. At nine o'clock the next morning, Jiang Botao came to Norinco again for a formal inspection.
"Liu Lang, your company is the best in the country. No one can compare with you. Your efforts over the past five years have not been in vain!"
Jiang Botao came to a conclusion after the investigation.
Liu Lang smiled. He knew exactly what other companies were like. Compared with Norinco, it was not just the equipment that was inferior... In fact, the equipment gap has been shortened in recent years. Many companies have introduced foreign equipment.
Although the equipment is not up to the level of one person per person like Norinco, it is being upgraded very quickly.
The gap between other companies and Norinco lies in the level of workers. This is the most significant gap. With the same piece of equipment, Norinco workers can produce knives worth more than 100 yuan each, while other companies can make knives worth more than 100 yuan each.
Less than.
In addition, the system of Norinco is very complete, especially the nine basic laws of Norinco. Everyone works based on these nine basic laws.
Nothing is complete without rules. The nine basic laws tell employees what to do, how to do it and what to do. How can such an enterprise not be strong?
These nine basic rules really attracted Jiang Botao's attention, and he asked his secretary to take out his notebook and write them down carefully. He planned to promote them in other companies when he returned. Even if he could not promote the nine rules, he would still implement one or two.
However, what Jiang Botao is most interested in is the feasibility research department of Norinco. This department is personally led by Liu Lang and has now cooperated with Huaxia Industrial Technology Co., Ltd. in the research and development of CNC machine tools.
The first-generation CNC machine tool was named "Exploration No. 1" by Liu Lang. This CNC machine tool has dual-axis linkage functions for turning and grinding. Now that the testing machine has been basically formed, a piece of steel billet is made into a bearing on site, and balls are added.
At the same time, the quality of the bearings has reached the first-class standard of Norinco.
Norinco has its own product standards. The accuracy of Category 1 products is three times higher than that of domestic Category 1 products, and the accuracy of Category 2 products is also twice that of domestic Category 1 products.
Jiang Botao is most concerned about this "Exploration No. 1" CNC machine tool, which will definitely cause a huge sensation once it is mass-produced.
"Liu Lang, was this CNC machine tool completely independently developed and manufactured by you?"
"Mr. Jiang, except for the servo system, all the core components are, almost fifty percent!"
Liu Lang replied.
"How difficult is the servo system?"
Jiang Botao asked again.
"The main thing is the control chip. We have cooperated with SMIC to carry out independent research and development. It is not too difficult to explore the No. 1 chip. It is estimated that it can be domestically produced in half a year."
Liu Lang gave the answer.
"What about the price? If it is sold in the country, what is the price?"
"What about the price? Let's not talk about the servo system. Let's just say that the cost of this Discovery One should be around 200,000 yuan. Including the imported servo system, it will be expensive, at least around 500,000 yuan. If it is put on the market...
... It’s about 600,000 yuan. If the servo system is domestically produced, the cost will immediately drop to 300,000 yuan. The market price is about 400,000 yuan!”
"Haha, half a year is not long! Four hundred thousand yuan is not much... Everyone, have you seen it? This is wealth, our own wealth. This is a big step for our country's industry, and it is also an ice-breaking step. As long as there is a breakthrough, then
There is a vast ocean in front of you, and that is where you will swim proudly, Liu Lang, you must tell me in advance when the time comes, and I will stand and cheer you up!"
Jiang Botao was very excited, and even saw tears flashing in the corners of his eyes. He couldn't help but be excited. There is a standard for modern manufacturing, which is the widespread application of CNC machine tools. European and American countries, especially big countries like the United States, Britain and Germany
More than 50% of manufacturing
CNC machine tools have been popularized in factories, but what about China? Even though some companies bought several CNC machine tools during this year, the total did not exceed ten, and the price of each one started at US$500,000, and
Many people who buy it don’t know how to use it, and it becomes completely a decoration.
It cost half a million US dollars to buy one, but you still can’t use it. This is simply a shame, a shame for the industry, and a shame for the country. And this shame is being gradually erased by Liu Lang. It can be said that once the "Exploration One" mass
Production, the price of 400,000 RMB will instantly turn the "high-end" CNC machine tools into cabbage prices. Compared with 500,000 US dollars, what is 400,000 RMB and not cabbage prices?
It is conceivable that with the extensive application of CNC machine tools, the country's manufacturing industry will improve at an extremely fast rate. Mechanical products that could not be manufactured in the past will continue to appear. What is more important is China's own machine tools that manufacture these products.
In fact, there are many different views on the research and development of CNC machine tools in China, especially many companies. They are not optimistic about the research and development of CNC machine tools themselves. The reason is that the investment is too large and the technical barriers cannot be broken. The key is the technical barriers, which are the biggest problems faced by domestic companies.
The shortcoming is, of course, funding is also an important reason. Just imagine, would a company with an annual output value of less than RMB 18 million spend more than RMB 10 million on research and development? Moreover, investing so much money may not necessarily lead to success.
Another objective reason is that the economic and trade exchanges between China and Western developed countries are becoming more and more extensive and open. Many products that were not available a few years ago can now be imported, including CNC machine tools.
Even if the machine tool technology purchased is not the most advanced and has high requirements for users, as long as the workers are well trained, it can still be widely used. At least it is much better than domestic machine tools. In addition, the high price is not a problem. It is better than
It is much cheaper to do research and development on your own, but you also have to consider the time cost. How long does it take to develop a CNC machine tool? It will take less than four or five years. In comparison, it seems that buying a machine tool is the most cost-effective.