Chapter 1122 The technicians at the Steel Rolling Mill Research Institute are so ambitious
The newly built research institute of the steel rolling mill has a total of four floors. There is a conference room on the second and third floors, which can be used to hold meetings, and can also be used for all technical staff to discuss, research, and study in the conference room.
Knowing that Duan Hongxuan was coming on Monday, all the technical staff at the institute were very excited. Each of them had many questions that they needed to ask Duan Hongxuan for advice. Now they finally waited until Duan Hongxuan arrived. All the technical staff were holding notebooks and pens.
They gathered in the conference room on the second floor.
Duan Hongxuan and his party came to the conference room on the second floor. Deputy Director Zhao took the lead and pushed open the door of the conference room. As soon as Duan Hongxuan's figure appeared at the door of the conference room, warm applause suddenly sounded in the conference room. The sound was so loud that Duan Hongxuan was frightened.
After a jump, Duan Hongxuan looked at the familiar and unfamiliar figures in the conference room, and the excited expressions on their faces. Duan Hongxuan felt a little embarrassed, thinking that he was a little too much. So many people were eagerly looking forward to this.
I, but I haven’t been to the steel rolling mill for such a long time. I really feel like I’ve let down everyone’s enthusiasm!
Duan Hongxuan waved to everyone sheepishly. It took a long time before everyone stopped applauding at the signal of Deputy Director Zhao.
Deputy Director Zhao knew that everyone had many questions to ask Duan Hongxuan, but it was difficult to arrange for so many people, so after soliciting Duan Hongxuan's opinion, Duan Hongxuan stood at a large blackboard in the conference room and asked everyone if they had any questions.
Ask questions one by one in order and then talk.
So everyone raised their own questions one after another under Duan Hongxuan's roll call.
Duan Hongxuan did not answer everyone's questions first, but asked Xiaojia to ask questions first. After everyone had finished asking, I would judge the crux of Xiaojia's problem based on those questions.
The people present understood what Duan Hongxuan meant. When everyone asked a question, Duan Hongxuan just nodded to show that he understood it, and did not give us an answer. Instead, one person asked questions one after another, which made Xiaojia think about the answer, and also gave a brief explanation.
Not a bit disappointed!
Deputy Director Zhao also looked puzzled. Out of trust in Duan Hongxuan, I did not interrupt Duan Hongxuan, but allowed Jiao Dongliang to continue.
Duan Hongxuan listened to the questions raised by everyone, and the more he listened, the more he frowned. Duan Hongxuan shook his head repeatedly when he heard the question. Everyone felt even more baffled when they saw Duan Hongxuan's appearance. Few people were not panicked, thinking that it was them.
The questions asked were not too complicated at all, which made Jiao Dongliang very unhappy!
Duan Hongxuan looked at Huang Gong and us again, "Huang Gong, Li Gong, we are old acquaintances. They are not studying steel smelting. What level are they in that field? They don't know what they are, right?"
The final analysis is not because the steel rolling mill is currently producing machine tools that are among the first to be retired domestically or even internationally. The steel rolling mill has no special steel formula that is currently the only one in the world, so they feel that the technology of their steel rolling mill is not yet at the international advanced level.
Now, the questions they are thinking about should also be caught up, right?"
Duan Hongxuan looked at the technicians who responded and nodded: "After all, they are still vague in their minds. Do they think that those things were researched by themselves?"
"...!"
Everyone nodded when they heard this, Duan Hongxuan sighed, and then his face became solemn: "You said that they are evil and aim too low, but you think it is too much!
Putting aside the machine tools of the steel rolling mill, I mean, compare their actual level with some experts from other units in the machine tool industry, and let them feel their own chests. What level are they at now?
I’m sure if they continue like that, the end result will not be a waste of time and money, but when they retire, they will only be able to achieve one thing!”
It seems that everyone in your research institute needs to seriously review. You are indeed no longer impetuous. What he said about aiming too low and aiming too low is absolutely wrong!
"Liang Zi, what Teacher Duan said was so hurtful!"
They just understand, understand the drawings and formulas, know what should be paid attention to, and where the problem is with the machine tool. By comparing it with the drawings, they can quickly identify the problem and solve it very quickly.
The small sound shocked Xiaojia. Xiaojia quickly shut up and looked at Duan Hongxuan. Duan Hongxuan said angrily with a straight face: "Since they know that those technologies were developed by them, why should they give it to you?"
Ask those questions?
Why do the technicians in other units of mine have developed machine tools that retreat first, but they don’t have the ability?"
Although everyone on the stage was talking, it could be seen from their expressions that we didn't think so, and few of them were even nodding.
Everyone asked questions one by one, and everyone only had one question. Seeing that a few hours had passed, and more than half of the people had not yet had their turn, Director Lin watched from the side and did not light up, thinking that Duan Hongxuan would not be waiting until noon.
We are about to leave, so what’s the point of delaying our journey?
What they should do now is to study new things, but they should find ways to break apart what you left behind, crush it into pieces, thoroughly understand and digest the thinking and technology in it, and make it their own.
Let their technical level improve before they consider researching new things!
But does that count as a thorough understanding? Can they solve the problem without the drawings and formulas? If they can definitely do it, it only proves that they understand it but have not fully understood it, and have they turned it into their own thing!
"...!"
Director Lin was about to make no move, but saw that Duan Hongxuan did not click on another question before he finished listening to one person's question. Instead, he raised his eyes and looked at everyone, shook his head and sighed: "Oh! You understand all the questions they asked.
Well, more than half of the people present have not yet had their turn, but the time has not been delayed for a long time, and you have also briefly summarized their questions. For the most part of the people who have had their turn, we will just let them ask questions today.
Yes, I'm very sorry. They can continue asking questions when they don't have the chance last time!
Does that mean that they don’t think that the machine tools currently produced in the steel rolling mill are researched by themselves?
This chapter is not finished yet, please click on the next page to continue reading the exciting content! At that time, Deputy Director Zhao said: "Teacher Da Duan, to be honest, you are convinced of his skills, but his evaluation of you
It’s really hard for you to accept, you want to hear from Teacher Da Duan why he didn’t comment like that!”
But have they thoroughly understood the formulas for current machine tools and special steel? Have they fully mastered the technologies involved? Have they not broken apart those technologies, crushed them up, eaten them, and digested them badly?
The research institute currently has a large number of people, and the main technical staff are divided into two groups. One group studies steel smelting technology, and the other group does not research machine tools.
They look at what the questions they raised are all about? Why have they never considered those questions before? Why are those questions popping up one after another now?
"Yes, your skills are as good as his, but he can slander your character!"
Huang Gong and the others nodded solemnly, and Jiao Dongliang continued: "You understand, why are they focusing on researching new special steel formulas now? Is that bad ambition?
Have they really eaten through what you left? Do you think so?
At that moment, Xiaojia didn't understand what Duan Hongxuan meant.
No matter how you are like him, you will insist on claiming that your things are yours out of thin air to flatter yourself, and your character is not that bad!"
Duan Hongxuan smiled and said: "Have they ever thought about where those machine tools that were retired first came from? Where did that unique steel formula come from?"
Everyone also spoke in agreement. Jiao Dongliang looked at Xiaojia and nodded: "Well, just tell me some of your personal opinions!"
Everyone didn't fully understand what he was saying, Xiaojia could not help but look at each other, and Deputy Director Zhao sighed: "Oh! Teacher Da Duan, now that you call me teacher makes me convinced!"
They haven't figured out those issues yet, so they have stopped thinking about making steamed buns by themselves. Is it bad to aim too low?
When Huang Gong heard that, he immediately stood up and said to Duan Hongxuan, his face red with anger: "Teacher Da Duan, you call him teacher because you respect his skills and the person he is, but he is
How can I slander you out of thin air?
Judging from the questions they asked, they clearly want to study other models of machine tools that are also advanced, and want to study other special steels, right?
"Yes, Teacher Da Duan, you are right to praise me!"
"It was Teacher Duan who brought it to your factory!"
Everyone said something to each other, saying that they were equal. Even Director Zhao looked at Duan Hongxuan with a happy look. Duan Hongxuan smiled when he saw everyone's expressions, then his face became serious and he slammed the table hard: "Bang!"
Jiao Dongliang's words made everyone calm down. Everyone looked at each other in confusion. Yes, with our current technical level, why do we think we can research new advanced machine tools? Just because the steel rolling mill does not have the latest machine tools.
The machine tool that retreated first? But that was not developed by us?
Teacher Da Duan, let him tell you what he thinks you should do next, and you all listen to him!"
Fortunately, he came today to give you a heads-up, otherwise you would have continued to follow the correct path and be complacent!
"Wow!" There was an uproar outside the conference room. Everyone whispered to each other, with expressions of submission on their faces!
There are so few units researching machine tools in the country, and there are thousands or even tens of thousands of technicians among them. Where can they be ranked outside?
The steel rolling mill currently has no machine tools that are the first to be withdrawn, so they feel that as technicians in the steel rolling mill, they are incapable of researching and developing other first-return machine tools?
You bring them a basket of steamed buns, and they just think the steamed buns are delicious. They smell and taste delicious, but why do the steamed buns smell so good? What should you pay attention to when making noodles? How should the fillings be adjusted? What seasonings should be added?
How much seasoning do you need?
"Yes, you are wrong, but what should you do?"
To be honest, after listening to the questions they asked today, it can be seen that they are very serious about studying technology and want to make some achievements. However, it is very regrettable. If you sum up the questions that no one asked, although they are small,
It seems that everyone is asking the same question, but in reality, the question that no one asked can be summed up in two words - bad and too low!"
Duan Hongxuan looked at everyone and waited for a moment, then said: "Are you very convinced? I think you, a big year old, dare to use those seven words to evaluate them, you have no idea how to know the sky."