Duan Hongxuan really felt that the technicians at the steel rolling mill were a little distracted and had taken the wrong path.
Some of the technologies they brought to the steel rolling mill were not fully digested, and they actually started to think arrogantly about researching new and advanced machine tools. In Duan Hongxuan's opinion, this was just playing the piano randomly.
Everyone was stunned by Duan Hongxuan's stick, but in any case, the people here are basically high-level intellectuals, and their brains are fine. They were just temporarily fascinated by the prosperous scene of the steel rolling mill.
Duan Hongxuan's warning made these technicians suddenly wake up, and then they were all so ashamed that they could not control themselves. Yes, what does the technology currently possessed by the steel rolling mill have to do with them? This is all the technology given by Duan Hongxuan, they just used it.
These technologies have figured out what is going on, but as Duan Hongxuan said, it would be difficult for them to restore it without the original drawings and data. This means that without these drawings and data, they are nothing.
, they did not digest these technical information and make it their own.
Duan Hongxuan looked at the expressions on everyone's faces and understood that these people had listened to what he just said and had all awakened. So he nodded with satisfaction and looked at Deputy Director Zhao who was looking at him expectantly. Duan Hongxuan
He nodded and said: "Okay, it seems that you all understand what I just said, which means that at least you are not completely confused yet, you were just confused for a moment, and it's not too late to wake up now!
I’ll just tell you my suggestions!”
When everyone heard this, they didn't care about being ashamed. They quickly sat upright and took out their notebooks and pens to prepare notes.
"The advice you give them is to wait and study something new now. If it's necessary, they won't think you're being mean. At the end of the day, they don't have the technical ability!
So it’s not a bad idea for them to wait and study new things now!
Let's take machine tools as an example. The most important thing they do now is not to give you a set of machine tool drawings that you left in the steel rolling mill. You understand, to understand the technology involved under the drawings, and to
Digesting it and turning it into his own thing will definitely be able to do that. You suspect that their skills and vision in machine tools will be slightly improved!
Li Gong also nodded excitedly. Duan Hongxuan smiled at the excited people at the scene. After waiting for a moment for Xiaojia to vent his emotions, he continued: "The following are some of your personal opinions. You
It is stated here for everyone’s reference. As for how to do it, it is entirely up to them!
Will it be relatively complicated for them to study new steel formulas before they run out of those research ideas?
Huang Gong excitedly grabbed Li Gong's hand and shook it vigorously: "Old Li, it turns out that's like that. Then we finally understand that adding some rare earth elements just now will affect the performance just now. It's too bad. Then we finally can't.
Directions!"
"Wow!" Everyone suddenly realized when they heard that, and everyone became excited.
"Hahaha!"
The technical information of any set of machine tools involves a few aspects of major technologies. Once they have mastered all those major technologies, how about the technical content of the entire machine tool and the arrangement and combination of those major technologies? Isn't it difficult?
"
Thinking of that, Director Lin broke out in a few drops of sweat. Fortunately, Duan Hongxuan didn't remind him in time. If our entire steel rolling mill had gone up like that, the final result would have been terrible!
Deputy Director Zhao looked at Duan Hongxuan who was talking eloquently and shook his head repeatedly. I really have something to say now.
Duan Hongxuan's words made the old technicians who studied steel smelting in the steel rolling mill sit up and freeze. Their faces were all red with excitement. They pulled each other excitedly and slapped the arms of the people next to them. They were so excited that they could not control themselves.
So after they have lowered their technical level and have no overall design thinking, they blindly take it for granted to design a machine tool. Do they think it is ridiculous? Is it bad to aim too low?
?
For example, why are certain ingredients added to the formula? What impact will the addition or removal of those ingredients have on certain properties of the steel? What impact will the added amount of ingredients have on certain properties of the steel? And why do those trace ingredients do
Will it affect some of the performance just now?
The drawings and materials you left to them are not only for them to produce machine tools, but they are also their learning materials. And the bad learning materials they put there are just for learning. Is that just trying to make a fool of yourself?"
It's almost noon now, you're hungry, now you have the strength to scold them!
Bad, you really have to go, there was no chance for you to come back to visit their research institute last time!"
Huang Gong nodded, "This is bad! Now they don't have two special steel formulas, and they said they will study that formula again!"
And through Dong Lunlei's beating of the research institute today, Director Lin suddenly felt that the impetuous atmosphere was just in the research institute. Our entire steel rolling mill is now full of that impetuous atmosphere. The most terrifying thing is that the entire steel rolling mill is full of impetuous atmosphere.
People in the steel rolling mill still know it.
Don't talk about us. Seeing how hard-working and confident the technical staff of the institute are, the entire steel rolling mill will probably become impetuous, bad and ambitious due to our influence. The final result will not be steel rolling.
The factory worked hard for people and money but gained nothing.
"Teacher Da Duan, let me tell you more!"
Everyone laughed, but a few people continued to cheer, "No, do you think Teacher Da Duan should scold you again, lest you become impetuous again when he leaves?"
As for swearing, hahaha, you are so good at cursing, and they are all younger than you. If they don’t have many children, I’m afraid their children are younger than you. What’s the matter with you scolding them!
Duan Hongxuan shook his head and cursed with a smile: "Who asked you to scold someone in such a low voice just now? Is this the first time in your life that no one is scolding you?"
After saying that, Duan Hongxuan raised his hand to look at his watch and nodded to Director Lin: "I gave them the ideas. I'm sure they think the ideas you gave them are okay. If they are willing to follow the ideas you gave them, you think you should do it for the time being.
Is it necessary to give them some more guidance?
Director Lin looked at Dong Lunlei and couldn't help but nodded repeatedly. It was so timely to invite Duan Hongxuan here today. I must report today's matter to Director Yang seriously.
Wait for those questions, before they blur those questions, can't they stop trying to study the impact of certain trace amounts of dilute components in steel on the properties of steel?
"No, Teacher Duan, let me remind you again so that you don't aim too low and aim too low. Do you think he should scold you?"
Duan Hongxuan nodded: "That matter is also complicated. Did you give them two copies of the special steel formula? Although one of them was taken away by the military industrial unit, you think they have no basis for keeping it, right?"
At that time, Huang Gong raised his hand in a bad mood. Duan Hongxuan nodded to Huang Gong: "Huang Gong, do you still have no problem?"
To be honest, when we study steel smelting in the future, what we are most concerned about is the carbon content in the steel. How to remove as much as possible the sulfur and other harmless substances in the steel. Regarding the common presence of certain rare earth elements in the steel,
We basically have that concept of function.
Duan Hongxuan continued: "When they have thoroughly digested the technical information of each set of machine tools, the next thing to do is not how to arrange and combine those technologies so that it can be combined into a set of broken machine tools that retreat first.
That involves the overall design ideas and design thinking of the machine tool, and they can't learn those from the drawings you left.
"Haha, Mr. Huang, who can be wrong? They were just temporarily confused. It's fair to say that it's quite accurate. Are you okay?"
You just answered the questions they asked!"
But among them, they should pay attention to the fact that for the entire machine tool, some of the technologies are not the first to be retired, but they are the most appropriate for me to use in that machine tool. They must replace some of the technologies with newer ones.
If it is bad, the final effect may actually affect the overall performance of the machine tool!
Duan Hongxuan's words were like a bright light in the white night, allowing us to see the direction of retreat. At most, we would have been blindly groping without a clue like we did in the future.
Therefore, the design of machine tools is simply a matter of mastering technology, and the most important thing is an overall thinking.
"Hahaha!"
Everyone was completely convinced. Yes, we wanted to learn and digest the machine tool information that we returned first, but instead we just thought about it all day long. The more the technicians here thought about it, the more they felt ashamed.
Before they have a rough idea of the impact of certain rare elements on certain properties of steel, they can study new steel formulas and narrow the range of choices from millions to hundreds of thousands.
Or even tens of thousands or even thousands, wouldn’t it be more complicated and difficult to produce results in that way?”
Director Lin sitting next to me, although I don’t know much about technology, I completely understood the meaning of what Duan Hongxuan said. Even I felt that Duan Hongxuan’s words hit the mark right away.
If it were Duan Hongxuan's reminder today, the group of people in the institute would probably still be complacent but self-aware.
They now want to study new steel formulas. It's not just a blank slate, it's like trying to find a suitable possibility among tens of thousands, hundreds of thousands or even millions of possibilities.
"...!"
"coax!"
Before he learns overall thinking, plus some of the techniques he has mastered, he will not be able to try to design new machine tools at that time.
Even Director Lin who was sitting next to him was happy. Duan Hongxuan said with a smile: "You have said everything that needs to be said. Even if you say everything to the point, they will definitely have a long memory and continue to be so impetuous. You are really on the right track."
Already.
The time difference is short, let’s do that first today!”
"Oh, yes, Teacher Duan, he just gave an example of machine tools, but what should you smelters do?"
The place was in a commotion, and nothing was said. In short, it was not because they wanted Duan Hongxuan to walk so slowly.
"Teacher Da Duan, you are so ashamed after hearing what he just said. You have lived a small amount of your life in vain, but in the end you are as cool and calm as he is at such a young age, and he can see clearly, which really makes you ashamed!
"
When looking at a set of drawings, they have to think about why that technology is used and what role it plays in the overall performance of that machine tool. And changing some of the indicators of that technology will definitely affect the overall performance of the machine tool.
